Where to buy ? How to Install ?

 PowerPlus - The Original

Designed and tested for over 7 years. This model is made of high quality Aluminium casing and an LED Indicator. The Original is a rugged and durable desulfator that will give you many years of problem free usage.



PowerPlus - Touch Series

A new model from the evolved from the original version.
PowerPlus "Touch Series"  is the WORLD'S FIRST desulfator built in with a Battery Analyzer and made of high quality plastic and incorporating a TOUCH SENSOR that will activate the LED upon placing your finger on the sensor. The 3 colored LED indicates to the user the power of your battery.

                                                                         

IMPORTANT ! The 2 most important point to note is..... 

1 - Does you car need to be re-tuned if you remove your battery?
2 - Do you have the PIN code to unlock your radio should your radio unit relock itself ?

Please do not remove the battery terminals if you are unsure of any of the above. Send your car to a qualified mechanic to have them installed.


For best result, we recommend that you fit your car with battery shields which you can easily build before instaling PowerPlus. Find out why it is important to know about the placement of the car battery in an engine compartment here.

The Installation

PowerPlus installation is very simple. Locate an area to place PowerPlus. Make sure it is cleaned, free from oil and dirt. Make sure the wires are fastened as close to the battery terminal as possible.

Connect the Positive (RED) first, followed by the Negative (BLACK). Now remove the double sided tape and stick the unit to the area that is cleaned.